When you import data into TPC, you can create a detailed report of the incoming data, showing the actual raw data or coordinates and how TPC reduced it. The details report can also show which imported records were ignored, which are not supported, which points, if any, were renumbered, and lots more. You control the information through the Settings dialog for the file type you are using. In the dialog shown here, Details and Show Unsupported Records are selected.
Look over the data. This is the data TPC will use to recompute the positions of the imported points. To make changes to the data, open the Traverse View for the imported traverse and change the appropriate values. TPC will recompute the traverse using the edited values.
[[ C:\TPC\RAW\89-3134.rw5 ]]
Project:89-3134
Coordinates:2226 Desc:START
Y:5000.000 X:5000.000 Z:100.000
OP:2010 Desc:CP 1010
Y:200844.704 X:1710006.449 Z:591.765
BS:2011 Desc:
AZ:80°53'49" HC:0°00'00" HT:0.00
Instrument Ht:5.05
Target Ht:6.50
SS:2226 Desc:CL TRAIL
SD:154.710 ZA:84°03'31" HC:0°30'32" HT:6.50
SS:2227 Desc:
SD:117.500 ZA:87°03'16" HC:324°15'53" HT:6.50
SS:2228 Desc:CL TRAIL
SD:105.900 ZA:85°21'07" HC:0°16'12" HT:6.50
…(more data)
OP:2017 Desc:CP 2017 HUB
Y:200246.902 X:1710909.685 Z:700.748 HI:5.15
BS:2016 Desc:
AZ:204°58'03" HC:0°00'00" HT:6.50
BS:2016 Desc:
AZ:204°58'03" HT:6.50
Instrument Ht:5.19
Target Ht:6.50
SS:2357 Desc:
SD:56.130 ZA:89°07'43" HC:152°03'31" HT:6.50
SS:2358 Desc:
SD:33.130 ZA:92°19'46" HC:12°59'45" HT:6.50
Changed duplicate point label 2226 to 2226:1
Reports
Report View
Message View
Personal, Premium, Professional