Rotates the entire survey, selected traverse(s) or selected points to any basis of bearing/azimuth.
Rotate the rest of the points around this point. Its coordinates will not change. Use the [>] pick button to select the point from the current drawing.
Note: Protected points will not be rotated unless the option to rotate protected points is on.
Specify the amount either by entering the Degrees or rotate From one degree To another. Use the [>] pick button to select a bearing from the current drawing.
Note: You can enter an equation to specify the amount of rotation.
Choose what part of the survey/traverse to rotate.
Entire Survey (Traverses Manager) - Rotates the entire survey including all traverses and unused coordinate points.
Selected Traverses (Traverses Manager) - Rotates only those traverses currently selected in the Traverses Manager.
Entire Traverse (Traverse View) - Rotates the entire traverse.
Selected Points (Traverse View) - Rotates only those points currently selected in the Traverse View.
If you enter this dialog by right clicking a drawing object for this traverse, you will not be given the option to select what to rotate – the entire traverse will be rotated.
This is a toggle option. When activated, protected points within the traverse will be rotated along with unprotected points.
Undoes any previous rotation.
Applies the rotation you have specified and returns you to the previous view.
Returns you to the previous view without making any changes.
Setting the Default Direction