Chances are you are going to use point symbols in your drawing. Point symbols help identify the feature you tied, the monument you set and so on. TPC includes extensive point symbol support right out of the box.
TPC supplies hundreds of point symbols right out of the box in what we call our Object Library. You'll find BLM corners, traffic symbols, point symbols and more.
To look at the object library, from Drawing View choose Insert | Blocks. Use the dialog to browse through the symbols folder and see what's there. You can Cancel without inserting a block.
For the most part, you do not insert symbols into a drawing with TPC. You change the control point settings and let the traverses draw the symbols for you. If you grew up using CAD, this is quite a change for you. See Drawing View vs CAD.
Once a symbol is inserted you can edit the block reference which changes the way the block is drawn for that one drawing object. You can also edit the block, which changes the way every drawing object that references that block is drawn.
Adding your own point symbols can be as easy as browsing to a block file and adding it to the symbol list. TPC also has options for extracting symbols (blocks) for existing CAD files.
You can tell TPC to globally over-ride a symbol so that it is always drawng the same way in all drawings. You might do this for a quarter corner or section corner you plan to reference in more than one drawing.
You can edit the symbols TPC uses. Change a symbol size or the name that TPC displays in the legend.
Personal, Premium, Professional
Using Drawing View
Smart Drawing Objects
Working with Drawing Objects